Closed and Open Circuit Lime and Sediment Remover
OPTICIDE ORCA: This chemical product removes limestone, rust, and mineral deposits from cooling systems, heat exchangers, boilers, and water pipes by breaking them down at micron levels during circulation.
It does not harm metals such as copper and metal pipes, and it is successfully used in the construction industry to clean concrete and mortar residue.
It is safely used in the cleaning of sprinklers and pipe systems in humidification units in the textile industry, injection molding machines, molds, and cooling systems used in the plastics industry.
It is used for the interior and exterior cleaning of submersible, mud, and pool pumps; for removing lime residue from the floor walls and glass of swimming and ornamental pools; for removing cement residue stuck to the bodywork of vehicles used in concrete mixing and transportation; for removing lime and sediment caused by cooling water in pasteurization lines in canning; and for cleaning surfaces on marble processing machines and machines in the ceramic industry.
INSTRUCTIONS FOR USE
Cooling Systems: Drain the entire system. Refill the system to operating level. Add 10 liters of water to 1 liter of OPTICIDE ORCA. Circulate for 5-6 hours. Measure the pH of the water in the system. Add OPTICIDE ORCA if necessary to maintain the pH between 1.5 and 2. Continue circulation. After 5-6 hours, drain and rinse the system. Repeat the process if necessary.
Direct Use: Mix one part OPTICIDE ORCA with 5 parts water. Apply to the materials with a brush or cloth. Wait for a short time for it to penetrate and remove residue.
Immersion Method: Place the materials to be cleaned in a pool or plastic container and immerse them in the OPTICIDE ORCA and water mixture. Wait until the residue dissolves. Then, remove and rinse thoroughly with water.
USE DOSAGE
Use 1/5 to 1/10 of the product, depending on the total water volume.
| PRODUCT CODE | WEIGHT | PIECE | FORM |
| EH2264603 | 35 | 1 | SIVI |
| EH2264607 | 70 | 1 | SIVI |
| EH22646010 | 1250 | 1 | SIVI |
Brand: Optimal
Basınçlı Döküm Kalıp Hattı Alkali Temizleyici OPTILINE ALCA, konsantre özel bileşimi ve yüksek alkali formüllü yapısı ile yüksek basınca,…
Brand: Optimal
Product for Forming a Thick Crystalline Zinc Phosphate Layer on Steel and Iron Surfaces
Brand: Optimal
Brand: Optimal
Multi-Component Zinc Phosphate Plating Bath Additive Product OPTICOAT ZN 9500 ADR is a multi-component zinc phosphate product that is homogeneous, fine-crystalline, spray-applied,…
Brand: Optimal
Carbonic Acid Corrosion Inhibitor for Steam Generator; OPTIGARD MR 450 is a neutralizing liquid corrosion inhibitor specifically developed to eliminate carbon dioxide-induced corrosion…
Brand: Optimal
Solvent Bazlı, Yapıştırmaya Elverişli, Poliüretan Kalıp Ayırıcı REMOLD WX70,MDI, MDI/TDI bazlı, soğuk kürlenen PU döküm işleminde kullanılan, solvent…
Brand: Optimal
Solvent Bazlı, NDI Sistem Poliüretan Elastomer Kalıp Ayırıcı REMOLD ELAST,NDI bazlı poliüretan sistemler için ısıyla kürlenen solvent bazlı kalıp ayırıcıdır.…
Brand: Optimal
Extra Moisturizing Body Wash OPTIGEN BODY, ultra yoğun, özel formüllü, mükemmel temizlik performanslı, her duşta cildinize ferahlık ve enerji veren, bol…
Brand: Optimal
Boyamaya ve Yapıştırmaya Elverişli, Yüksek Sıcaklık, Poliüretan Kalıp Ayırıcı REMOLD RS 5000 A, otomotiv sektöründe, poliüretan işleme, boya ve…
Brand: Optimal
Alcohol-Based Concentrated General Cleaning Product OPTIGEN FRESH LT: A daily surface and floor cleaning product with high-level grease and dirt dissolving properties, containing a…
