Concentrated Technical Hand and Skin Cleanser
OPTILAKE: A concentrated cleaner safely used for hand, face, and body cleaning of personnel working in all industrial activities, heavy industry, automotive, iron and steel, mining, rubber, printing, textile, maritime, and shipyard sectors, due to its excellent degreasing and subsequent hand repair properties.
It easily removes grease, ink, oil, rust, soot, and other heavy dirt from the skin of personnel exposed to heavy soiling without damaging the skin.
Because it contains lanolin and surfactants, it protects the skin and repairs cracks with continuous use. It has a pleasant scent.
It has controlled foaming, does not foam excessively, and therefore saves rinsing water.
It cleans quickly, saving time.
It can also be used for whole body cleaning. It leaves no detergent residue on hands and body.
INSTRUCTIONS FOR USE
OPTILAKE: After diluting the product according to its intended purpose, take one or two drops from liquid soap dispensers depending on the level of soiling. Rub hands or skin thoroughly. Rinse with water. Its composition does not contain acids, phosphates, caustic soda, ammonia, solvents, or irritating chemicals.
USAGE AMOUNT
For heavy oils, use 1/4 dilution; for normal oils, use 1/6 dilution; for body cleansing, use 1/8 dilution; due to its concentrated formula, it is used after dilution with water at a ratio of 1/4 – 1/8.
| PRODUCT CODE | WEIGHT | PIECE | FORM |
| EH2665003 | 30 | 1 | LIQUID |
| EH2665006 | 60 | 1 | LIQUID |
| EH26650020 | 200 | 1 | LIQUID |
| EH26650010 | 1000 | 1 | LIQUID |
Brand: Optimal
Algae, Bacteria and Fungi Preventive OPTIGARD PARA prevents the growth of algae, bacteria and fungi that may occur in industrial cooling systems and eliminates existing biological…
Brand: Optimal
Silicone-Free Mold Release Spray MR 300 prevents the part from sticking to the mold by forming a thin film between the mold and the product. It allows the part to be easily removed…
Brand: Optimal
Cr+6 Chromatization Product, Which Forms a Light Yellow to Brass Yellow Chromate Layer on Aluminum and Aluminum Alloys When Added to Water Please contact our technical team for detailed…
Brand: Optimal
Liquid Product Containing High Alkali, Silicate, Phosphate and Surfactants Used in the Form of Dipping in Baths in the Hot Degreasing Process Before Enameling
Brand: Optimal
Silicone-Based Mold Release Spray MR 700 prevents the part from sticking to the mold by forming a thin film layer between the mold and the manufactured product. It allows the part…
Brand: Optimal
Antifoam Please contact our technical team for detailed information.
Brand: Optimal
Dip Type Welding Spatter Preventer WELD DEEP is a dipping type product in gel form developed to prevent hot burrs from sticking to the torch in gas shielded welding. PRODUCT CODE WEIGHT…
Brand: Optimal
Lubricating, Loosening and Rust Remover Spray VERDA penetrates immediately onto applied surfaces, loosening rust. Loosened rust layers allow for immediate results in problematic areas…
Brand: Optimal
Yüksek Sıcaklık Dayanımlı, Solvent Bazlı, Yarı Kalıcı Kalıp Ayırıcı REMOLD FRC 5509,yüksek sıcaklık dayanımlı, berrak, solvent bazlı, nemle kürlenen,…
Brand: Optimal
