Optinox Paste

Weld Stain Remover Cream

OPTINOX PASTE is a highly wetting agent designed for cleaning weld marks on stainless steel surfaces.
Even if a weld spatter inhibitor is used during welding on stainless steel, the resulting weld marks must be removed.
It removes weld marks, heat treatments, and all types of corrosion and rust stains from stainless steel surfaces.
Suitable for AISI 304, 316, and 321 and its derivatives.
It has a very short reaction time. It is fast-acting and has strong etching properties.
It is washable with water and has a slow drying feature.

INSTRUCTIONS FOR USE
Remove surface oils with OPTINOX B 100. Before opening the cap, shake until a homogeneous mixture is achieved. Apply with a suitable brush. After the reaction time, rinse with plenty of clean, running water.
The immersion process is particularly recommended for those who weld frequently. The cleaning process is carried out by placing the metal parts in a basket and immersing them in the immersion pool using a hand crank or crane.
Do not apply to hot surfaces. Wear goggles, gloves, apron, etc. when applying. In case of skin contact, rinse with plenty of water.

USE DOSAGE
Reaction Time: (Cold drawing at 20°C) 15–60 minutes Consumption: 150–250 mg/kg