Lubricating, Loosening and Rust Remover Spray
VERDA penetrates immediately onto applied surfaces, loosening rust. Loosened rust layers allow for immediate results in problematic areas like stuck nuts and bolts, without breaking.
Versatile and capable of performing the functions of multiple products in a single application.
It is a single product specifically designed for use on bolts, nuts, stuck battery terminals, speedometer cables, brake cables, rusted rims, mufflers, commutators, starter systems, air tools, engine blocks, studs, shackles, stuck locks, and exhaust pipes. It is also used for mold storage, removing rust from rusted nuts and washers.
It is used in rust removal, loosening stuck nuts and bolts, and in all sectors requiring corrosion inhibitors on metal.
INSTRUCTIONS FOR USE
For Rust Removal with VERDA: Apply VERDA to the rusted area. Wait 30-60 seconds before removing the loosened rust with a cloth or brush. To loosen stuck nuts and bolts: Apply VERDA to the areas where the problem parts come into contact. After 30-90 seconds, separate the parts. If the initial treatment fails, repeat the process.
To protect metal parts against corrosion: apply VERDA to the entire surface and air dry if necessary.
USE DOSAGE
Use the concentrate without dilution.
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
EH3035375 |
500 ML |
12 |
AEROSOL |
|
EH3035373 |
30 LT |
1 |
LIQUID |
|
EH3035376 |
60 LT |
1 |
LIQUID |
Brand: Optimal
Kalıp Temizleyici OPTISOL MC 707kalıp temizleyici, yüksek aktif solvent bazlı özel temizleyicidir. Yüksek sıcaklıklara maruz kalmış alüminyum, metal,…
Brand: Optimal
High Performance Corrosion Inhibitor for Copper Wire Drawing and Alloys OPTICOR WX 5500 is a water-soluble corrosion inhibitor specifically designed for application on copper…
Brand: Optimal
Deburring Liquid Please contact our technical team for detailed information.
Brand: Optimal
Alkaline, Silicate-Free Degreasing Product for Iron, Steel, Aluminum and Galvanized Surfaces
Brand: Optimal
Silicone-Based Mold Release Spray MR 500 prevents the part from sticking to the mold by forming a thin film between the mold and the product. It allows the part to be easily removed…
Brand: Optimal
High Performance Concentrated Microbiocide OPTIGARD LEO MIX is a highly water-soluble, super-concentrated disinfectant inhibitor developed to prevent biofilm growth in cooling and…
Brand: Optimal
Silicone-Based Mold Release Spray MR 700 prevents the part from sticking to the mold by forming a thin film layer between the mold and the manufactured product. It allows the part…
Brand: Optimal
Brand: Optimal
pH Regulator for Closed Circuit OPTIGARD PH 40 is a liquid product containing organic acids, designed for systems with high pH levels. It is used to lower the pH to a level suitable…
Brand: Optimal
Biological Odor Eliminator for Drains and Pipes OPTIBIOS 760 is a highly specialized biological product used to eliminate unpleasant odors in plumbing and drain lines in industrial…
