Welding and Surface Cleaning Spray
OPTINOX B 300S removes welding and heat treatment stains, oxidation, pitting, light dirt, and oil from stainless steel surfaces in a single process, preparing the surface for passivation. It is suitable for cold-drawn AISI 304, 316, and 321 and its derivatives.
The surface of stainless steel materials is protected against corrosion, pitting, and rust by a thin passive layer rich in chromium oxide, which naturally forms on the surface under suitable conditions. This passive layer forms only on clean surfaces containing sufficient chromium in the alloy and in environments containing sufficient oxygen.
The resulting passive chromium oxide layer is self-repairing under normal conditions, even if the surface is subjected to mechanical damage.
Heat and mechanical processes such as welding, cutting, drilling, cutting, cutting, bending, drawing, and shaping damage this layer. This corrosion-resistant passive layer must be regenerated.
To regenerate the passive layer, weld stains and contamination must be completely removed from the surface using chemical methods.
OPTINOX B series etch products guarantee the formation of a passive layer.
INSTRUCTIONS FOR USE
OPTINOX B 300S removes heavy dirt and oil from the surface with OPTINOX SURFACE. Mix the contents of the OPTINOX B 300S canister until homogeneous. Spray the mixture onto the surface with a hand sprayer or a compressed air pump. After the reaction time (the surface turns green), rinse with clean water at 100–150 bar pressure. Allow to dry naturally. Do not touch.
Caution: Do not apply in sunlight. Do not apply to very hot surfaces (+25°C). The ideal application temperature is 15–20°C. Extend the application time in cold weather.
DOUBLE USE
Reaction Time: 45–90 minutes (at 20°C). Consumption: 4–6 m²/kg.
|
PRODUCT CODE |
WEIGHT |
PIECE |
FORM |
|
EH1454023 |
35 KG |
1 |
LIQUID |
|
EH1454027 |
70 KG |
1 |
LIQUID |
|
EH14540220 |
220 KG |
1 |
LIQUID |
|
EH14540210 |
1200 KG |
1 |
LIQUID |
Brand: Optimal
Closed Circuit Heating and Cooling Aluminum Systems Anti-Scaling Corrosion OPTIGARD DEKA converts calcium and magnesium salts in boiler water into a soft, non-sticky sludge that is…
Brand: Optimal
Electrical Circuit Cleaner Oily Spray TRON is a volatile cleaning solvent specially formulated for cleaning unwanted residues such as moisture, dust, and oil that accumulate over…
Brand: Optimal
Brand: Optimal
Alkaline, liquid product used in spray and dip systems, in degreasing and cleaning processes from sheet metal, iron, electrogalvanized and dip galvanized surfaces.
Brand: Optimal
Makineler İçin Çok Amaçlı Temizleme Kimyasalı OPTILINE MACH 39: Otomobil fabrikalarının boyama sonrası fırın temizliğinde, metallerin silinerek yağdan…
Brand: Optimal
Neutral Cleaning and Disinfection Product for Floor Cleaning Machines OPTIMAT VF X505 is a water-soluble, environmentally friendly, super-concentrated, neutral, foam-controlled industrial…
Brand: Optimal
Kalıp Temizleyici OPTISOL MC 505kalıp temizleyici, yüksek aktif organik özel temizleyicidir. Balmumu, silikon, yağ, sertleşmemiş PUR ve diğer artıkları, plastik,…
Brand: Optimal
CIP PROCESS AND RESEARCH ALKALI CLEANER OPTIGARD ® CIP 100 is a low-foam, high-level cleaning product suitable for CIP and COP applications, showing a high cleaning effect even when…
Brand: Optimal
pH Balancer for Cooling Collectors OPTIGARD SA 60 is a pH stabilizer containing inhibitors formulated to neutralize cooling tower circulating water alkalinity and balance the ambient…
Brand: Optimal
Dry Lubricant Spray SPIR is a product that can be used in general industrial maintenance, in areas where grease lubrication is not possible, and for lubricating metal parts. It protects…
